How to Repair Samsung Galaxy S21
Expert Verdict: Is it worth repairing?
Yes. The Samsung Galaxy S21 is a high-quality smartphones with modular parts. Most cracked screen issues are fixable under $50, making a repair significantly cheaper than replacement.
Common Issues
- Cracked screen
- Battery replacement
- Charging port
- Camera issues
Point your camera—live AI guidance
Stop scrolling through long manuals. Point your camera at the device and let AI show you exactly what to do. No more guessing.
Repair Steps
Safety First
Unplug the device from the power source and allow it to cool down completely. Ensure your workspace is clean, well-lit, and free of hazards. Wear safety glasses if working with electrical components.
Gather Required Tools
Prepare your toolkit: screwdriver set (Phillips and flathead), needle-nose pliers, multimeter for electrical testing, cleaning materials, and replacement parts if needed. Have a container ready for storing screws.
Document the Disassembly
Take photos at each step before removing components. This will help during reassembly. Label screws and parts with tape to remember their positions.
Stuck on this step?
Point your camera at the Samsung Galaxy S21 and let FixMode AI guide you through the rest.
Open the Device
Following manufacturer guidelines, carefully remove the outer casing. Use the appropriate screwdriver and apply gentle, consistent pressure. Keep track of all screws and their locations as they may be different sizes.
Diagnose the Problem
Inspect internal components for visible damage: burnt wires, loose connections, worn parts, or unusual buildup. Use a multimeter to test electrical continuity if applicable. Identify the faulty component.
Remove the Faulty Part
Disconnect any electrical connectors carefully. Note their orientation before removal. Unscrew mounting brackets and gently remove the defective component. Handle delicate parts with care to avoid additional damage.
Install the Replacement
Insert the new part, ensuring proper alignment. Reconnect all electrical connections in their original positions. Secure with mounting screws, being careful not to overtighten.
Clean and Maintain
Before reassembling, clean dust and debris from internal components using compressed air or a soft brush. Check for any other parts that might need maintenance.
Reassemble the Device
Refer to your photos and reverse the disassembly process. Ensure all internal components are properly seated and all screws are returned to their correct locations. Verify no parts are left over.
Test Thoroughly
Before fully closing the case, plug in the device and perform a test run. Listen for unusual sounds, check for proper operation, and verify the issue is resolved. If successful, secure the final panels and clean the exterior.
Why use the AI Camera?
Smart Part Detection
Automatically identifies screws, clips, and internal components so you know exactly where to start.
Safety First
Alerts you to high-voltage components and sharp edges before you touch them.
Technician in your Pocket
Voice guidance and AR overlays mean you never have to put your tools down to check a manual.
Safety Warning
Always unplug electrical devices before working on them. Repairing devices under warranty may void the warranty. If you are unsure about any step, seek professional help. This guide is for informational purposes only, and FixMode is not responsible for any damage that may occur.
Related Models
Stuck? Point your camera
Real-time AI guidance. Point at your device and get live step-by-step help. No manual needed.
